One of the most popular ceiling options in the United States in the 70s were textured options. They consist of a mixture of foam and polyurethane, are called “Pocorn”, because they have a similar appearance. However, in modern conditions, their popularity is fading, such finishing requires replacement or repair. How to carry out such procedures, it is proposed to learn more on the site.
Dismantling the ceiling
There are several options for removing this type of finishing. If you plan to remove Popcorn ceiling cost, do it yourself, then you can use the following methods:
The most effective option, allowing you to remove all the finishing without a trace, is the spraying method. To do this, you need to take a spray bottle, fill it with clean water and spray the liquid on a certain area. It is important to do this evenly and avoid water penetration onto the plasterboard base. Next, carefully scrape off all the spraying with a scraper.
Dry method, when you need to use a mask or respirator to protect your respiratory system and goggles. It is recommended to open a window, install a fan so that it blows air out of the room. Next, remove the top layer of the ceiling with a scraper. Then, using sanding, the finish is leveled or its remains are completely removed.
Using a washing vacuum cleaner with significant suction performance. Then the vacuum cleaner will act as a scraper after wetting the finish.
Construction or repair
However, if you need a renovated home, and you do not plan to remove the ceiling, then you can carry out reconstruction. Also, if desired, you can create a “Popcorn” ceiling from scratch in a certain room or house.
To carry out the work, you will need to do the following:
- Prepare a spray mixture and tools with which the process will be carried out.
- The ceiling is completely cleaned of dust and other deposits. This is especially important during repairs, as this type of ceiling tends to accumulate small particles. You can use dry and wet cleaning. Only in the second case, all other work is carried out after the surface has completely dried.
- Next, a primer is applied to improve the adhesion properties of the surface, to ensure reliable adhesion of the mixture.
- The mixture in liquid form is sprayed on the area intended for repair, or over the entire surface of the ceiling.
It is important to apply the mixture evenly, avoiding the creation of a thick layer. After work, it is necessary to allow the composition to dry completely.
